• ¡En oferta!
  • -5%
 
Disco Duro Solido para servidores Intel 3.8TB DC S4500 SATA III 2.5" Internal SSD SSDSC2KB038T701 Disco Duro Solido para servidores Intel 3.8TB DC S4500 SATA III 2.5" Internal SSD SSDSC2KB038T701
Disco Duro Solido para servidores Intel 3.8TB DC S4500 SATA III 2.5" Internal SSD SSDSC2KB038T701
 

Disco de Estado Solido para servidores Intel 3.8TB DC S4500 SATA III 2.5...

$ 1.326.666 Efectivo. Transferencia. Depósito Bancario
$ 1.392.999
Webpay. T. Débito/Crédito. OC 30 días
Antes $ 1.396.491
Impuestos incluidos
BS3848
Nuevo
BS3848
+20
Comprar ahora Comprar ahora
Cargando...
 Estimar costo de envío

Intel SSDSC2KB038T701 Overview

Upgrade your computers storage with the 3.8TB DC S4500 SATA III 2.5" Internal SSD from Intel. This internal SSD features a SATA III 6 Gb/s interface capable of supporting maximum sequential data transfer rates of up to 470 MB/s allowing you to store important files directly to the drive. This SSD also supports a variety of advanced technologies including enhanced power loss data protection, temperature monitoring and logging, end-to-end data protection, and 256-bit AES hardware encryption.

Enhanced Power Loss Data Protection

Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.

Temperature Monitoring and Logging

Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.

End-to-End Data Protection

End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.

 

Intel SSDSC2KB038T701 Specs

Storage
Drive Capacity 3.8 TB
Performance
Interface SATA III (6 Gb/s)
Random Read Speed 72,000 IOPS
Random Write Speed 33,000 IOPS
Sequential Read Speed 500 MB/s
Sequential Write Speed 470 MB/s
Latency 36.0 µs (Read)
36.0 µs (Write)
Physical
Drive Type SSD
Form Factor 2.5" (7 mm)
SSD Specs
Flash Memory Type Tri-Level Cell (TLC)
SMART Support No
Reliability / Data Integrity
Encryption 256-Bit AES Hardware Encryption
Endurance (Total Bytes Written) 7.6 PB
Mean Time Between Failures (MTBF) 2.0 Million Hours
Non-Recoverable Read Errors per Bits Read 1 in 1017
Electrical
Power Draw 5.6 W (Active)
1.1 W (Idle)
Environmental
Operating Shock 1000 G / 0.5 ms
Storage Shock 1000 G / 0.5 ms
Operating Vibration 2.17 G
Storage Vibration 3.13 G
Operating Temperature 32 to 158°F / 0 to 70°C

Intel SSDSC2KB038T701 Overview

Upgrade your computers storage with the 3.8TB DC S4500 SATA III 2.5" Internal SSD from Intel. This internal SSD features a SATA III 6 Gb/s interface capable of supporting maximum sequential data transfer rates of up to 470 MB/s allowing you to store important files directly to the drive. This SSD also supports a variety of advanced technologies including enhanced power loss data protection, temperature monitoring and logging, end-to-end data protection, and 256-bit AES hardware encryption.

Enhanced Power Loss Data Protection

Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.

Temperature Monitoring and Logging

Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.

End-to-End Data Protection

End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.

 

Intel SSDSC2KB038T701 Specs

Storage
Drive Capacity 3.8 TB
Performance
Interface SATA III (6 Gb/s)
Random Read Speed 72,000 IOPS
Random Write Speed 33,000 IOPS
Sequential Read Speed 500 MB/s
Sequential Write Speed 470 MB/s
Latency 36.0 µs (Read)
36.0 µs (Write)
Physical
Drive Type SSD
Form Factor 2.5" (7 mm)
SSD Specs
Flash Memory Type Tri-Level Cell (TLC)
SMART Support No
Reliability / Data Integrity
Encryption 256-Bit AES Hardware Encryption
Endurance (Total Bytes Written) 7.6 PB
Mean Time Between Failures (MTBF) 2.0 Million Hours
Non-Recoverable Read Errors per Bits Read 1 in 1017
Electrical
Power Draw 5.6 W (Active)
1.1 W (Idle)
Environmental
Operating Shock 1000 G / 0.5 ms
Storage Shock 1000 G / 0.5 ms
Operating Vibration 2.17 G
Storage Vibration 3.13 G
Operating Temperature 32 to 158°F / 0 to 70°C